                       Multi TOS booter

  This package has necessary components to create bootable floppy for install
 ROM-TOS in RAM of Atari ST computers.It is very welcome on old Atari ST 260
 machines, which have only Boot-ROM's, without TOS.

Program supports following TOS versions:
TOS 1.00 US, UK and German
TOS 1.04 US, UK and German
TOS 2.06 US, UK , German and UK 'Supertos' .
It is same as by program SELTOS, both programs use same relocation system.

   How to create bootable floppy:
 Start program TRACCC.PRG in medium or TRACCM.PRG in high resolution.
Click on 'LOAD DS* FILE button. Select file CREDISK.DSC, and click OK.
After it put DD floppy in drive A or B (then must change target drive to B).
Leave 'FORMAT TARGET' on YES. Click WRITE button. Program will create
single sided 9sector/track bootable floppy, with file MTOSBOOT.SYS on it.
 After it save desired ROM-TOS image to floppy immediately after
that SYS file. Name is irrelevant, because load goes from BIOS.
 And this is all, now is floppy ready to use.

 Don't worry when TOS prints about bad CRC in ROM after restart,
it's normal due to relocation.

 Note: ROM-TOS image files must have adequate length:
TOS 1.00 and 1.04: 192KB or 196608 bytes.
TOS 2.06: 256KB or 262144 bytes.

Pera Putnik,  March 19. 1999.

   piters@eunet.yu


